πŸ€–chiliad
ClaudePricing
Back to blog
November 9, 2026Β·Dmytro Tonkikh

Channel Prioritization and Budget Allocation in Google Ads: What Changed and How to Manage It at Scale

channel prioritization
budget allocation
performance max
search partners
display network
google ads scripts

For as long as Google Ads has existed, the only budget decision you could make about Search partners or the Display Network was binary: on or off. Turn Display off on a Search campaign and you lose the cheap conversions it sometimes brings; leave it on and it can quietly eat a third of the budget on a bad week. In October 2026 Google replaced that switch with two controls: channel prioritization and budget allocation. They are optional today. From February 2027 they are the only mechanism, because the current Display Expansion behaviour on Search campaigns goes away.

This post explains how the controls work, what the data from real accounts says about why they matter, and how to manage them across an account with a script instead of clicking through every campaign.

How Channel Prioritization Works

Every channel a campaign can serve on gets one of two priority levels. High priority channels are funded first. Low priority channels get whatever is left after the high priority channels have spent what they can, within your target if you run Target CPA or Target ROAS. Google calls this a waterfall, and the picture is exactly that:

Daily budget e.g. 1,000 per day High priority: Google channels Spends first, as much as it can within the target what is left Low priority: Search partners optional cap, e.g. at most 10% of the daily budget Low priority: Display Network optional cap; 0% means never spend here

Budget allocation is the second control and only exists for Low priority channels. You set a maximum percentage of the average daily budget that the channel may spend. A 5% allocation on a 1,000 per day budget means Display should stay at or below 50 per day. Google is explicit that this is best effort: daily spend can occasionally exceed the allocation, the allocation resets daily, and unspent or overspent amounts do not carry over. Setting a Low priority channel to 0% stops spend on it entirely, which is the new way to opt out.

Which channels you can prioritize depends on the campaign type:

Campaign typeChannels you can prioritizeBudget caps
SearchGoogle Search, Search partners, Display NetworkYes
ShoppingGoogle Search, Search partnersYes
Performance MaxGoogle channels (Search, YouTube, Maps, Gmail, Discover as one group), Search partners, Display NetworkYes
Demand GenGoogle channels, Display NetworkNo, priorities only

Note the grouping for Performance Max and Demand Gen. YouTube, Discover, Maps and Gmail are bundled with Search into Google channels. You cannot push YouTube behind Search with this feature. You can push Search partners and Display behind everything Google owns, which for most advertisers is the decision that matters.

Why This Matters More Than It Looks

The controls arrive at the same time as the API fields that let you measure what each channel actually does. Running the channel report across a mid-sized retail account we manage, this is the kind of picture that comes out:

CampaignChannelShare of spendCPA vs Google channels
Performance Max, core categorySearch partners2%1.8x
Performance Max, core categoryDisplay Network2%1.0x
Performance Max, new product lineDisplay Network24%no conversions
Demand GenDisplay Network29%19x
Search, brandSearch partners18%5x

Three things stand out. First, on mature Performance Max campaigns the secondary channels are small and roughly as efficient as the rest; nothing to fix. Second, on a new campaign Display took a quarter of the budget without a single conversion. That is Smart Bidding exploring, and before October your only options were to wait or to turn Display off for good. Third, the Demand Gen campaign spent 29% of its budget on Display at nineteen times the CPA of YouTube. A single Low priority setting fixes that without touching the campaign structure.

The common thread: these channels behave differently per campaign and per month, and the only control used to be an account-wide habit (“we always untick Search partners”). Prioritization lets you keep the upside, the occasional cheap conversions from partners or Display, while putting a hard-ish ceiling on the downside.

How bidding strategies change the behaviour

Bid strategyEffect of prioritiesEffect of caps
Target CPA, Target ROAS, Target CPC and not limited by budgetLittle to none. Every channel already gets what it can at the target.Applied. This is where caps earn their keep.
Target CPA, Target ROAS, Target CPC and limited by budgetHigh priority channels spend first within target; Low priority channels get budget only when they can convert at target.Applied.
Maximize Conversions, Maximize Conversion Value, Maximize Clicks, Manual CPC, Target Impression ShareHigh priority channels spend first, the remainder flows down.Applied.

If most of your campaigns run a target and are not budget-constrained, the priority tier alone will not move spend. The cap will.

The February 2027 Deadline

Search campaigns with the Display Network enabled currently run under Display Expansion, which allocates part of the budget to Display with no visible setting. Starting February 2027 that allocation is removed and those campaigns migrate to channel prioritization. Google says you may see spend shift between Google Search, Search partners and Display when that happens.

Two practical consequences:

  • To keep today’s behaviour, set the Display Network to Low priority with a 50% allocation. That is Google’s own recommendation and it is best effort, like every cap.
  • Search campaigns on Target Impression Share stop serving on Display altogether.

Setting priorities before February makes them apply immediately and replaces the Display Expansion behaviour, so there is no reason to wait for the migration to hit.

Account Default or Campaign Setting?

The controls live on two levels. An account-level default applies to every campaign of a type (one default for Search, one for Shopping, one for Performance Max, one for Demand Gen) unless a campaign or a shared budget overrides it. A campaign-level setting overrides the default for that campaign, and for a shared budget it applies to all campaigns on the budget. In the interface this is the “Use campaign-level settings” choice, and you can switch back to the account default at any time.

The sensible structure is the same one you would use for anything else that scales: a conservative account default that reflects the typical case, and campaign-level exceptions where the data says otherwise. The catch is that the account default has to be set in each client account (it cannot be set from a manager account), and campaign exceptions drift as campaigns launch, mature and get paused. For an agency with a few dozen accounts this is exactly the kind of setting that gets configured once and never revisited.

Eligibility

Not every budget qualifies. Shared budgets must only contain campaigns of the same type and the same bidding strategy type. Campaigns with running experiments are excluded. Campaign total budgets (flighted budgets) are only supported for Demand Gen. The API exposes this as a read-only eligibility flag with reasons, which is handy because the reason tells you what to fix.

What the API Exposes

Google Ads API v26.1 (released 28 October 2026) added the fields, which means scripts can manage this at scale. The account default is a single resource per customer, customer_budget_network_setting, which does not exist until you create it. The campaign-level setting lives on the budget, in campaign_budget.budget_network_settings, next to a read-only budget_network_eligibility. Both hold one entry per campaign type, and each entry lists which channels sit in TIER1 (high) and TIER2 (low), plus optional caps in milli-percent, so 50,000 is 50%.

The per-channel performance comes from the campaign report segmented by network. The same segment that used to show only Search versus Search partners now splits Performance Max and Demand Gen by surface:

SELECT campaign.name, segments.ad_network_type,
       metrics.cost_micros, metrics.conversions, metrics.conversions_value
FROM campaign
WHERE segments.date DURING LAST_30_DAYS
  AND campaign.advertising_channel_type IN ('SEARCH', 'SHOPPING', 'PERFORMANCE_MAX', 'DEMAND_GEN')

Values of segments.ad_network_type include SEARCH, SEARCH_PARTNERS, CONTENT (the Display Network), YOUTUBE, DISCOVER, GMAIL, MAPS and GOOGLE_TV. Mapping them to the three controllable channels is straightforward: SEARCH_PARTNERS is Search partners, CONTENT is Display, everything else is Google channels.

Managing It with a Script

We built Channel Priority Manager to run this as a routine rather than a project. It does three things on every run:

  1. Sets the account default from a handful of config values: which campaign types, the priority per channel, and the caps. The default configuration puts Search partners and Display on Low priority with a 50% Display cap, which keeps today’s behaviour through the February migration.
  2. Applies campaign exceptions from a Google Sheet. The Settings tab lists every enabled campaign with its current values. To change one, you edit the HIGH/LOW and cap cells and clear the Action column; the next run applies it, writes the result into the Status column, and only touches budgets whose settings actually differ. RESET puts a campaign back on the account default.
  3. Reports and recommends. A Stats tab holds 30 days of cost, clicks, conversions, CPA and ROAS per network at account and campaign level. When Search partners or Display take at least 10% of spend with no conversions, or a CPA at least 1.5x Google channels, the script recommends Low priority with a cap sized to the current share (0% when there are no conversions). YouTube and Discover cannot be deprioritized, so heavy inefficient spend there is flagged for review instead.

A run on the account from the table above logs this:

=== Channel Priority Manager - PREVIEW (nothing is changed) ===
Campaigns: 14 in 12 budget(s). Account default set for: Search, Shopping, Performance Max
Channel stats: last 30 days (2026-10-10 to 2026-11-08), 3 recommendation(s)
RECOMMENDATION Campaign "PMax | New line": Display Network took 24% of spend with no conversions
  - set Display Network to LOW with a 0% cap
RECOMMENDATION Account default for Demand Gen campaigns: Display Network took 29% of spend
  with CPA 19.6x Google channels - set Display Network to LOW
[PREVIEW] Would update campaign "PMax | New line": account default
  -> Google channels HIGH | Search partners LOW cap 10% | Display Network LOW cap 0%
Current state written to the "Current 129-020-4051" tab (18 rows).
Channel stats written to the "Stats 129-020-4051" tab (26 rows).

Like every script on chiliad it respects Google’s Preview mode: the first run after pasting only logs what it would do and marks the sheet statuses with [PREVIEW]. Under a manager account the hosted loader runs it per client account, and the config, including the account default values, can differ per account from the chiliad dashboard without touching the code.

A Four-Step Playbook

  1. Measure first. Pull 30 days by network for every campaign type. Look at share of spend and CPA or ROAS relative to Google channels. Most mature campaigns will show nothing worth changing.
  2. Set a conservative account default per type. Google channels High, Search partners and Display Low. Add a Display cap of 50% on Search to stay level with today’s Display Expansion. Add caps elsewhere only where the data shows a problem.
  3. Handle exceptions at campaign level. New campaigns that explore Display without converting, Demand Gen campaigns that leak into Display, brand Search with expensive partner traffic. Low priority and a cap, or 0% where it never converts.
  4. Revisit monthly. Channels change as campaigns mature. A recommendation that was right in launch week is often wrong by month three, which is the argument for letting a script re-run the numbers rather than relying on memory.

FAQ

Does Low priority mean a channel stops serving?

No. Low priority channels receive what is left after High priority channels spend within target. Only a 0% allocation stops spend on a channel.

Can I prioritize YouTube below Search in Performance Max?

No. YouTube, Discover, Maps, Gmail and Search are one group called Google channels. You can only put Search partners and the Display Network behind that group.

Is the budget allocation a hard cap?

No. Google describes it as best effort against the average daily budget; daily spend can occasionally exceed it, and nothing carries over between days.

What happens to my Search campaigns in February 2027?

Campaigns with Display enabled migrate from Display Expansion to channel prioritization and may see spend shift. Set Display to Low with a 50% allocation to keep the current behaviour, and expect Display to stop entirely on Target Impression Share campaigns.

Can I set this from my manager account?

Not in the interface. The account default has to be set inside each client account, which is why a script that runs per account under the MCC is the practical route for agencies.

Ready to Automate Your Google Ads?

Install scripts with one click and manage them across all your accounts from a single dashboard.

πŸ€–chiliad

The platform for managing and automating Google Ads scripts at scale. Built for PPC agencies and freelancers.

chiliad β€” Google Ads Script Management - Monitor and manage Google Ads scripts across every account | Product Hunt

Product

  • Use Cases
  • Features
  • Claude connector
  • Pricing
  • Marketplace
  • Blog
  • About
  • Roadmap
  • Changelog

Support

  • Contact Us
  • Help Center
  • Developer docs
  • Terms of Service
  • Privacy Policy

Β© 2026 chiliad. All rights reserved.